HotMelt™ is a plotter-cut adhesive used to bond decorative elements to garments. It comes on a transparent self-adhesive carrier, which makes weeding detailed designs much easier. Please note: if you are looking for PoliMelt, it has been discontinued. Please use HotMelt™ instead.
This adhesive is compatible with these exciting product lines:
LASER compatible
Tech Info
Tech PDF includes product thickness, roll sizing, and other technical information
Cut Settings
PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.
Cricut
- Material: Vinyl
- Pressure: Default
- Blade: Fine-Point Blade
Silhouette
- Material: Heat Transfer, Smooth
- Blade: 3
- Speed: 8
- Force: 4
Graphtec
- Speed: 8
- Force: 12
We use a 45° blade.
Application Instructions
Blade – 45° with low pressure
Cut – Mirror image
Temp – 300° F
Pressure – Medium, even
Time – 5 seconds
Peel – Warm, almost hot
Pressure – For Foils- Place foil over the Hotmelt, cover with Teflon Sheet and press for 10 seconds. Let cool, peel.
Care – Wash inside out, cold water, line dry. No dry-cleaning
Applies to: Cotton, Uncoated Polyester, Cotton/Polyester Blends, and Polyester/Acrylic Excluding Nylon